20kW Gas Hot Air Generator Suspended AGSX25 Sovelor

Propane gas suspended air heater 20kW AGSX25 - SOVELOR-DANTHERM

The AGSX and AGSX/C are hot air generators designed to be suspended or ceiling-mounted. Compatible with natural gas or propane gas, they feature atmospheric burners with 2-stage operation and quiet fans for optimal acoustic comfort. Easy to install with direct facade flue gas exhaust possible, they require no floor space and offer an economical solution for heating workshops, garages, restaurants, warehouses, commercial premises, greenhouses, exhibition or reception halls, industrial buildings, agricultural facilities and communal areas.

Optimal Performance

Equipped with multi-torch atmospheric burners with 2 speeds coupled to a high-performance heat exchanger (efficiency over 92% across the entire range), these units ensure rapid and uniform temperature rises. The 2-stage burner automatically adjusts power according to ambient temperature. Fully automatic, they operate without supervision. The pilot wire control allows up to 6 units to be controlled from a single thermostat and to reset safety boxes without intervention at height.

Energy Savings

Installation and commissioning are simplified. The automatic burner thermostat management enables rational and economical heating. The high-efficiency heat exchanger minimizes gas consumption. In case of grouped installation, a single generator or some of them can be activated to heat a specific zone without mobilizing the entire installation. The AGSX also allow maintaining differentiated temperatures according to zones.

Maximum Safety

The AGSX and AGSX/C incorporate all necessary safety devices: permanent flame control by ionization, overheat safety with reset, burner and ventilation control airstats.

Easy Installation

Flue gas exhaust is carried out through the roof or facade using dedicated kits. Sealed combustion operation (combustion air drawn from outside) is recommended for dusty or humid environments. Multiple accessories simplify installation: wall suspension brackets, simple exhaust kits, concentric flues, IPN mounting kits.

Two versions available

AGSX (standard): helical fan for direct heating without ductwork

AGSX/C: centrifugal fan for blowing through ductwork or connection to an outside fresh air intake duct

Propane Gas Hot Air Generator AGSX 25

Thermal Performance
This hot air generator delivers a maximum heat output of 20 kW and a minimum output of 14.8 kW. The airflow at 50°C reaches 2,100 m³/h with an air throw range of 12 meters, ensuring even heat distribution throughout the space to be heated. The efficiency at maximum power is 92%.

Electrical Characteristics
Power supply: 230 V / Single-phase / 50 Hz
Power consumption: 300 W

Gas Supply
Propane gas G31 flow rate at 15°C (37 mbar): 1.56 m³/h
Gas connection: ½ inch

Physical Characteristics
Dimensions (L x W x H): 1040 x 800 x 460 mm
Weight: 82 kg
Noise level at 5 meters: 43 dB(A)

Connections and Exhaust
Burner air intake diameter: 125 mm
Flue gas outlet diameter: 80 mm

Commercial Information
Brand: Sovelor-Dantherm
Model: AGSX 25 Propane Gas
Reference: AGSX25G31
EAN Code: 3700571532951