Natural Gas Radiant Heater RL22/2 SOVELOR-DANTHERM 22.5kW

Natural Gas Radiant Heater RL22/2 - SOVELOR-DANTHERM

The RL range radiant panels operate by direct combustion of natural gas. Designed to be suspended at heights ranging from 3 to 10 meters depending on the model, these units are particularly suitable for targeted heating of workstations or specific zones. They also provide an effective solution for high-ceiling spaces, whether open to the outside or uninsulated: places of worship, workshops, warehouses, agricultural and industrial buildings, garages...

Their infrared radiation technology allows direct heating of people and objects, without energy loss in the ambient air. This characteristic makes the RL particularly economical for heating premises with irregular occupancy, defined zones within large volumes, or buildings open to the outside.

Product Highlights

Optimal Performance
The RL units feature high-quality honeycomb ceramic panels. Gas combustion generates a temperature close to 1000°C at the panel surface, thus optimizing infrared ray emission. The calorific power ranges from 6.2 to 25.7 kW, with installation heights between 3 and 10 meters depending on the references.

Energy Savings
Infrared radiant heating directly targets people and equipment, eliminating energy losses in the air. It becomes possible to heat only the zones actually used, without prolonged preheating phases. This technology applies both to overall heating of large volumes and to thermal comfort of specific zones or isolated workstations.

Simplified Installation
Delivered fully assembled, the unit stands out for its compactness and lightness. It can be wall-mounted with a 25° tilt or ceiling-suspended. Installation consists of hanging, gas connection, and electrical supply.

Autonomous Operation
The RL units ensure fully automatic operation thanks to electronic ignition and permanent flame control by ionization.

Control Options:

Single-burner models (RL) accept control by manual switch, room thermostat, timer, or programmer (optional)

Dual-burner models (RL/2) additionally allow selection between half-power and full-power via a selector (optional)

All models can be integrated into a control cabinet capable of managing up to 30 units distributed across 4 independent heating zones

For any additional information regarding multi-zone control cabinets equipped with timers, room thermostats, and sensors, please do not hesitate to contact us.