Natural Gas Radiant Heater RL14 - SOVELOR-DANTHERM
RL radiant panels operate through direct combustion and are exclusively compatible with natural gas.
Ideal Applications
Designed for suspension at heights ranging from 3 to 10 meters depending on the model, these units prove particularly effective for targeted heating of workstations or specific zones. They adapt perfectly to high-ceiling spaces, whether open to the exterior or uninsulated: places of worship, workshops, warehouses, agricultural or industrial buildings, garages...
Thanks to their infrared technology, the radiation reaches people and surfaces directly without energy loss in the ambient air. This characteristic enables economical heating of premises with irregular occupancy, as well as isolated zones within large volumes or in open structures.
Optimal Performance
The RL models incorporate premium honeycomb ceramic panels. Gas combustion generates a surface temperature close to 1000°C, thus optimizing infrared ray emission. The available heat output ranges from 6.2 to 25.7 kW, with installation possibilities between 3 and 10 meters in height depending on the references.
Energy Efficiency
The infrared radiation principle heats occupants and equipment immediately, eliminating thermal losses in the air. This technology allows for punctual heating of useful zones without prolonged preheating phases. It applies equally to overall heating of large volumes and to temperature maintenance in poorly insulated, open premises, or at individual workstations.
Simplified Installation
Delivered fully assembled, each unit stands out for its compactness and lightness. Mounting is done either by wall fixation inclined at 25°, or by ceiling suspension. Installation boils down to hanging, gas connection, and electrical supply.
Autonomous Operation
All models feature electronic ignition and permanent flame monitoring by ionization.
Single-burner versions (RL) accept several control modes: manual switch, ambient thermostat, time programmer, or timer (optional).
Dual-burner versions (RL/2) additionally offer selection between reduced power (1/2) or full power via an optional selector.
A centralized control solution allows commanding up to 30 units distributed across 4 independent heating zones. For any additional information regarding multi-zone cabinets equipped with clocks, thermostats, and sensors, our service remains at your disposal.
Technical Specifications
Performance
Burner: 1 stage
Heating power: 12.8 kW
Max gas consumption at 15°C: 1.36 m³/h (G20) / 1.57 m³/h (G25)
Gas supply
G20 supply pressure: 20 mbar
G25 supply pressure: 25 mbar
Electrical supply
230 V / 1 phase / 50 Hz
Dimensions and weight
Dimensions (W x H x D): 114 x 21 x 31 cm
Weight: 15 kg
Product information
Brand: Sovelor-Dantherm
Supplier reference: RL14GN
Origin: France
EAN code: 3700571532708
Category: EQUIPMENT