-45%
Radiant plaster ceiling
FRICOKIT 924W Plaster Radiant Ceiling Kit - Ready to Install
633.50€incl. tax·527.92€excl. tax
348.43€incl. tax·290.36€ excl. tax
Product
Ceiling Radiant Plaster Kit FRICOKIT 1056W - FRICO
-25%
520.28€incl. tax·433.57€ excl. tax
Instead of693.70€incl. tax·578.08€ excl. tax
You save (-25%)
In Stock All in your cart Out of Stock
Complete electric radiant ceiling heating kit FRICOKIT 1056W by Frico, ready to install. Includes plaster heating panels, TEVMIN11 thermostat and connection cable. 1056W power for 14.40 m². Invisible, silent and economical radiant heating. Simplified installation with 44W and 88W panels. Ideal for well-insulated rooms as primary or supplementary heating. 10-year warranty.
Free shipping
On this order
Estimated delivery
from Wednesday 1 April
Order within 15h 41min
Easy returns
Return possible until 1 May 2026
Complete radiant ceiling plaster kit ready to install FRICOKIT 1056W - FRICO
Heating panels for radiant plaster ceiling
Ready-to-install kit for Frico radiant plaster ceilings.
Regulation and thermostat included.
FRICOKIT RANGE FROM FRICO BRAND
FRICO RADIANT PLASTER CEILING KIT MODEL FKIT1056
ELECTRIC RADIANT PLASTER CEILING KIT
RADIANT PLASTER CEILING KIT READY TO INSTALL
BOXES OF RADIANT HEATING PANELS
RADIANT PLASTER CEILING KIT 1056 W FOR 14.40 M²
Radiant plaster ceiling with the ready-to-install Fricokit
Before discussing radiant ceilings, a common misconception must be addressed. Many people believe underfloor heating is more effective than ceiling heating because heat rises. However, it is not heat but hot air that rises. With radiant heating, whether the source is at the ceiling or floor makes no difference.
The Fricokit is a complete heating system through the ceiling via plasterboard. However, if insulation is inadequate, a supplementary heater should be added and the Fricokit considered as comfort heating.
It is essential to use plasterboards specially adapted for this PRP heating technique.
While heating specialists may disagree on whether PRP (ceiling) or PRE (floor) is the better system, all agree it is the most efficient because the only element 'insulating' the heat source from the room is a thin 13mm layer of plaster.
Furthermore, nothing is placed on a ceiling whereas floors are cluttered with furniture and carpets that obstruct heat diffusion. Consequently, radiant heat efficiency in a PRP is optimal, reaching 80%. Additionally, response time is shorter compared to PRE as there is no need to overcome the inertia of the floating screed. As a result, its use requires low temperatures that do not exceed 32°C at full power.
How to install a Fricokit?
The Fricokit should be installed by a professional and each kit is suitable for one room as it has a single thermostat.
A Fricokit contains everything needed to integrate your radiant heating into plasterboard ceilings.
Each Fricokit thus contains a thermostat for regulation, a garland, radiant heating panels, and neutral panels that ensure continuity of the thermal conduction layer.
Installation consists of connecting junction boxes and properly positioning the components. DIY enthusiasts should have no problems.
The radiant panels are connected to each other via the garland which ends in a junction box leading to the thermostat.
The 230V Single-phase supply comes into the thermostat (11 Ampere relay). Finally, simply electrically connect the thermostat and the garland through the junction box.
How to size your installation?
In a location with very good insulation choose 75 W/m² for comfort heating: in this case the default Fricokit is ideal with very few neutral panel drops in the layout.
In a location with very good insulation choose 85 W/m² for a complete heating system.
In a location with less good insulation you can go up to maximum 100 W/m² for a complete heating system or for comfort heating if insulation is really poor.
A default Fricokit box has 73.3 W/m². It is designed for relatively good insulation conditions (walls, slab, etc.) and after deducting drops following layout you should have minimum 75 W/m².
Individual Fricokits have power ranging from 132 W to 2244 W and cover an area of 1.80 m² to 30.60 m². They are composed of radiant panels of 44 W (60 cm) and 88 W (120 cm).
Sizing example:
Your room is for example 20 m²:
Your insulation is very good: you choose 75 W/m² for supplementary heating thus you will need (20 x 75 = 1500 W): the Fricokit model at 1584 W with reference FKIT1584 Your insulation is good: you choose 85 W/m² for supplementary heating thus you will need (20 x 85 = 1700 W): the Fricokit model at 1716 W with reference FKIT1716 Your insulation is quite good: you choose 100 W/m² for supplementary heating thus you will need (20 x 100 = 2000 W): the Fricokit model at 1980 W with reference FKIT1980 Your insulation is not good: do not choose a Fricokit! Opt for another heating system!
Your insulation is very good: you choose 85 W/m² for a complete heating system thus you will need (20 x 85 = 1700 W): the Fricokit model at 1716 W with reference FKIT1716 Your insulation is good: you choose 100 W/m² for a complete heating system thus you will need (20 x 100 = 2000 W): the Fricokit model at 1980 W with reference FKIT1980 Your insulation is not good enough: do not choose a Fricokit! Opt for another heating system!
Ready-to-install plaster radiant ceiling kits FricoKit from Frico brand
Comfort
Through radiation principle, air masses are not heated, only surfaces, objects and people are. This results in gentle heat and stable temperature.
Space
Putting heating in the ceiling also frees up walls. Thus, the entire room surface can be used down to the smallest corner.
Aesthetics
The Radiant Plaster Ceiling is a completely invisible heating system, as it has the same appearance as a standard plaster ceiling.
Acoustics
The system is perfectly silent. Moreover, our radiant plaster ceilings correct acoustics between levels.
Hygiene
The PRP operates without air circulation. The environment becomes healthier without dust movement, mites, or odors.
Safety
The PRP is a safe system. Due to its location and low temperature, any risk of burns is eliminated. Its position also protects it against vandalism.
Simplicity
The system is easy to install, regulate and maintenance-free.
Negligible inertia
The PRP is perfectly adapted to the new thermal regulation.
Reliability
Our products fully comply with current standards and regulations. The heating element of the panels is marked 'NF Electricity'. Our products are guaranteed 10 years including ceiling according to special conditions.
Energy performance
Optimal energy control. No air stratification, low inertia. Constant and homogeneous heat. Thanks to technical management, operating costs will remain without surprise.
Fricokit® - Ready-to-install Radiant Plaster Ceiling
The Fricokit® is a complete ready-to-install PRP pack, designed to simplify costing, storage and installation.
There are 16 packs available with power ranging from 132 W to 2244 W.
Each Fricokit® consists of:heating panels neutral panels a specialized power line a specific TEVMIN11 Frico thermostat
Heating panels
The heating panels are prefabricated units consisting of a high-density rock wool insulant, laminated on the underside of which is glued a heating element equipped with its 2 m cold connection. Their power is 44 W or 88 W.
Neutral panels
The Sertikit neutral SKP36N panels are of identical construction to the heating panels, but they do not contain a heating element. They are necessary to ensure continuity of thermal insulation.
Regulation
It is necessary to provide suitable regulation commanding the Fricokit® heating panels according to indoor temperature. The TEVMIN11 thermostat included in the pack is a 6-order electronic thermostat with a first commissioning program. This program allows gradual temperature rise over a 10-day period (provided in the PRP CPT). It thus avoids risks of drying out and cracking of plasterboards after jointing.
Electrical connection
Each heating panel is equipped with a 2 m power cord with a male plug. Panel connection can only be made with specialized GPRP lines (PV No.60021772-514830 A). These lines consist of a connection cable with connectors fixed every 1200mm.
Implementation
Implementation is carried out in accordance with current regulations, particularly NF C15100, CPT-PRP, technical opinion and installation data sheet. It must be executed by qualified companies with the possibility for the heating electrician to install the entire system: framework, heating panels, neutral panels and specific PRP plasterboards, if they have a ceiling installation department with QUALIBAT 7151, 7152, 7153 qualification. Otherwise they must coordinate with a ceiling installer possessing these qualifications. A thermal study and a layout plan are mandatory for maximum comfort. No drilling should be made in the heating elements. Differential protection 30 mA per 7.5 kW maximum under 230V and 13 kW under 400V (three-phase plus neutral).
1 Box A = 1 x SKP36N + 1 x SKP3606 + 1 x SKP3612 1 Box B = 3 x SKP36N + 3 x SKP3606 + 3 x SKP3612 1 Box C = 3 x SKP36N + 1 x SKP3606 + 4 x SKP3612 1 Box N = 3 x SKP36N
Panel SKP36N: 0 W - 1200x600x40 mm Panel SKP3606: 44 W - 600x600x40 mm Panel SKP3612: 88 W - 1200x600x40 mm
Garland GPRP06: Connector for 06 panels - Length 06m Garland GPRP10: Connector for 10 panels - Length 09m Garland GPRP14: Connector for 14 panels - Length 12m Garland GPRP18: Connector for 18 panels - Length 15m Garland GPRM20: Connector for 20 panels - Length 09m Garland GPRP24: Connector for 24 panels - Length 18m Garland GPRM30: Connector for 30 panels - Length 12m
About the Frico brand:
Frico positions itself as a key player in developing innovative and economical heating solutions. Specialized in creating products aimed at reducing energy loss while maximizing comfort, Frico offers a varied range from energy-saving Thermozone air curtains to solar-inspired radiant cassettes, including aero-heaters renowned for their efficiency and durability. In addition, destratifiers and control systems optimize thermal ambiance while minimizing energy consumption. Frico's convectors finally offer an effective solution against cold drafts, ensuring homogeneous heat distribution. Frico thus establishes itself as the ideal answer for anyone seeking optimal heating performance with a concern for economy and energy efficiency.
Heating panels for radiant plaster ceiling
Ready-to-install kit for Frico radiant plaster ceilings.
Regulation and thermostat included.
FRICOKIT RANGE FROM FRICO BRAND
FRICO RADIANT PLASTER CEILING KIT MODEL FKIT1056
ELECTRIC RADIANT PLASTER CEILING KIT
RADIANT PLASTER CEILING KIT READY TO INSTALL
BOXES OF RADIANT HEATING PANELS
RADIANT PLASTER CEILING KIT 1056 W FOR 14.40 M²
Radiant plaster ceiling with the ready-to-install Fricokit
Before discussing radiant ceilings, a common misconception must be addressed. Many people believe underfloor heating is more effective than ceiling heating because heat rises. However, it is not heat but hot air that rises. With radiant heating, whether the source is at the ceiling or floor makes no difference.
The Fricokit is a complete heating system through the ceiling via plasterboard. However, if insulation is inadequate, a supplementary heater should be added and the Fricokit considered as comfort heating.
It is essential to use plasterboards specially adapted for this PRP heating technique.
While heating specialists may disagree on whether PRP (ceiling) or PRE (floor) is the better system, all agree it is the most efficient because the only element 'insulating' the heat source from the room is a thin 13mm layer of plaster.
Furthermore, nothing is placed on a ceiling whereas floors are cluttered with furniture and carpets that obstruct heat diffusion. Consequently, radiant heat efficiency in a PRP is optimal, reaching 80%. Additionally, response time is shorter compared to PRE as there is no need to overcome the inertia of the floating screed. As a result, its use requires low temperatures that do not exceed 32°C at full power.
How to install a Fricokit?
The Fricokit should be installed by a professional and each kit is suitable for one room as it has a single thermostat.
A Fricokit contains everything needed to integrate your radiant heating into plasterboard ceilings.
Each Fricokit thus contains a thermostat for regulation, a garland, radiant heating panels, and neutral panels that ensure continuity of the thermal conduction layer.
Installation consists of connecting junction boxes and properly positioning the components. DIY enthusiasts should have no problems.
The radiant panels are connected to each other via the garland which ends in a junction box leading to the thermostat.
The 230V Single-phase supply comes into the thermostat (11 Ampere relay). Finally, simply electrically connect the thermostat and the garland through the junction box.
How to size your installation?
In a location with very good insulation choose 75 W/m² for comfort heating: in this case the default Fricokit is ideal with very few neutral panel drops in the layout.
In a location with very good insulation choose 85 W/m² for a complete heating system.
In a location with less good insulation you can go up to maximum 100 W/m² for a complete heating system or for comfort heating if insulation is really poor.
A default Fricokit box has 73.3 W/m². It is designed for relatively good insulation conditions (walls, slab, etc.) and after deducting drops following layout you should have minimum 75 W/m².
Individual Fricokits have power ranging from 132 W to 2244 W and cover an area of 1.80 m² to 30.60 m². They are composed of radiant panels of 44 W (60 cm) and 88 W (120 cm).
Sizing example:
Your room is for example 20 m²:
Ready-to-install plaster radiant ceiling kits FricoKit from Frico brand
Comfort
Through radiation principle, air masses are not heated, only surfaces, objects and people are. This results in gentle heat and stable temperature.
Space
Putting heating in the ceiling also frees up walls. Thus, the entire room surface can be used down to the smallest corner.
Aesthetics
The Radiant Plaster Ceiling is a completely invisible heating system, as it has the same appearance as a standard plaster ceiling.
Acoustics
The system is perfectly silent. Moreover, our radiant plaster ceilings correct acoustics between levels.
Hygiene
The PRP operates without air circulation. The environment becomes healthier without dust movement, mites, or odors.
Safety
The PRP is a safe system. Due to its location and low temperature, any risk of burns is eliminated. Its position also protects it against vandalism.
Simplicity
The system is easy to install, regulate and maintenance-free.
Negligible inertia
The PRP is perfectly adapted to the new thermal regulation.
Reliability
Our products fully comply with current standards and regulations. The heating element of the panels is marked 'NF Electricity'. Our products are guaranteed 10 years including ceiling according to special conditions.
Energy performance
Optimal energy control. No air stratification, low inertia. Constant and homogeneous heat. Thanks to technical management, operating costs will remain without surprise.
Fricokit® - Ready-to-install Radiant Plaster Ceiling
The Fricokit® is a complete ready-to-install PRP pack, designed to simplify costing, storage and installation.
There are 16 packs available with power ranging from 132 W to 2244 W.
Each Fricokit® consists of:
Heating panels
The heating panels are prefabricated units consisting of a high-density rock wool insulant, laminated on the underside of which is glued a heating element equipped with its 2 m cold connection. Their power is 44 W or 88 W.
Neutral panels
The Sertikit neutral SKP36N panels are of identical construction to the heating panels, but they do not contain a heating element. They are necessary to ensure continuity of thermal insulation.
Regulation
It is necessary to provide suitable regulation commanding the Fricokit® heating panels according to indoor temperature. The TEVMIN11 thermostat included in the pack is a 6-order electronic thermostat with a first commissioning program. This program allows gradual temperature rise over a 10-day period (provided in the PRP CPT). It thus avoids risks of drying out and cracking of plasterboards after jointing.
Electrical connection
Each heating panel is equipped with a 2 m power cord with a male plug. Panel connection can only be made with specialized GPRP lines (PV No.60021772-514830 A). These lines consist of a connection cable with connectors fixed every 1200mm.
Implementation
Implementation is carried out in accordance with current regulations, particularly NF C15100, CPT-PRP, technical opinion and installation data sheet. It must be executed by qualified companies with the possibility for the heating electrician to install the entire system: framework, heating panels, neutral panels and specific PRP plasterboards, if they have a ceiling installation department with QUALIBAT 7151, 7152, 7153 qualification. Otherwise they must coordinate with a ceiling installer possessing these qualifications. A thermal study and a layout plan are mandatory for maximum comfort. No drilling should be made in the heating elements. Differential protection 30 mA per 7.5 kW maximum under 230V and 13 kW under 400V (three-phase plus neutral).
About the Frico brand:
Frico positions itself as a key player in developing innovative and economical heating solutions. Specialized in creating products aimed at reducing energy loss while maximizing comfort, Frico offers a varied range from energy-saving Thermozone air curtains to solar-inspired radiant cassettes, including aero-heaters renowned for their efficiency and durability. In addition, destratifiers and control systems optimize thermal ambiance while minimizing energy consumption. Frico's convectors finally offer an effective solution against cold drafts, ensuring homogeneous heat distribution. Frico thus establishes itself as the ideal answer for anyone seeking optimal heating performance with a concern for economy and energy efficiency.
| Brand | Frico |
| SKU | 6064499792 |
| MPN | FKIT1056 |
| Weight | 44.00 kg |
| Category | Radiant plaster ceiling |
| Condition | New |
FRICOKIT 1056W Radiant Heating Kit
Overview
The FRICOKIT 1056W kit from FRICO is a complete ceiling radiant heating solution, designed to cover an area of 14.40 m². This pack includes all the necessary elements for a functional and optimal installation.
Kit Composition
This pack includes:
8 SKP36N Sertikit neutral panels (0W) – dimensions 1200x600x40 mm 4 SKP3606 Sertikit plaster panels (44W) – dimensions 600x600x40 mm 10 SKP3612 Sertikit plaster panels (88W) – dimensions 1200x600x40 mm 1 TEVMIN11 thermostat 1 GPRP14 garland (wiring for 14 panels, length 12m)
Technical Specifications
Overview
The FRICOKIT 1056W kit from FRICO is a complete ceiling radiant heating solution, designed to cover an area of 14.40 m². This pack includes all the necessary elements for a functional and optimal installation.
Kit Composition
This pack includes:
Technical Specifications
| Total Power | 1056 W |
| Coverage Area | 14.40 m² |
| Voltage | 230 V Single Phase |
| Available Sockets on Garland | 0 (complete garland) |
| Box Composition | 2 x A + 2 x C |
| Weight | 44 Kg |
| Reference | FKIT1056 |
| Origin | France |
Discover
Related Products
-25%
Radiant plaster ceiling
Plaster radiant ceiling kit Fricokit 792W 10.8m² complete
560.70€incl. tax·467.25€excl. tax
420.53€incl. tax·350.44€ excl. tax
-25%
Radiant plaster ceiling
FRICO FRICOKIT 1320W Complete Radiant Ceiling Plaster Kit
842.80€incl. tax·702.33€excl. tax
632.10€incl. tax·526.75€ excl. tax
-35%
Radiant plaster ceiling
Plaster Radiant Ceiling Kit 1188W FRICOKIT - Frico
779.10€incl. tax·649.25€excl. tax
506.42€incl. tax·422.02€ excl. tax
/