Propane Gas Heater RL22/2 SOVELOR-DANTHERM 6.2-25.7kW

Propane Gas Radiant Heater RL22/2 - SOVELOR-DANTHERM

The RL radiant panels operate on propane gas through direct combustion. Designed for suspension between 3 and 10 meters depending on the models, they prove particularly effective for heating specific workstations or dedicated areas. Their use extends to high-ceiling premises, whether open to the outside or uninsulated: places of worship, workshops, warehouses, agricultural or industrial buildings, garages...

Their infrared technology reaches people and objects directly without energy loss in the ambient air. This characteristic enables economical heating of spaces with irregular occupancy, as well as specific zones in large volumes or open structures.

Optimal Performance

These units feature high-quality cellular ceramic panels. Gas combustion generates a temperature close to 1000°C on the panel surface, thus optimizing infrared ray emission. Available heat outputs range from 6.2 to 25.7 kW, with installation heights between 3 and 10 meters depending on the references.

Energy Savings

Infrared radiation directly targets people and equipment, eliminating energy losses in the air. This technology allows heating only the useful zones, without prolonged preheating phases. The RL models adapt equally well to overall heating of large volumes or to specific zones in poorly insulated premises, open to the outside, or individual workstations.

Simplified Installation

Delivered fully assembled, this compact and lightweight unit mounts on the wall with a 25° inclination or hangs easily. Installation is limited to hanging, gas connection, and electrical supply.

Autonomous Operation

The RL units are designed for automatic operation, equipped with electronic ignition and permanent flame control by ionization.

Single-burner models (RL) accept different control modes: manual switch, room thermostat, timer, or time clock (optional).

Dual-burner models (RL/2) offer the additional possibility of operating at half or full power via a selector (optional).

An advanced control solution also allows managing up to 30 units distributed across 4 independent heating zones.

For any additional information regarding multi-zone control panels with timers, room thermostats, and sensors, please contact us.