Reversible Air Heater 63 kW Prism PRI32 FRICO

Fixed Reversible Hot Water Air Heater 63 kW Prism PRI32 - FRICO

Designed for professional environments with significant thermal needs, this fixed hot water air heater PRI32 delivers a power output of 63 kW. It is particularly suitable for large volumes such as industrial buildings, logistics platforms, workshops with substantial ceiling heights, or large commercial spaces where thermal regulation must be constant and efficient.

Reversible operation for year-round use

The Prism PRI32 offers complete versatility thanks to its reversible operation. It provides both hot water heating and cold water cooling, allowing the indoor climate to be adapted according to the seasons without any intervention on the existing installation. Advanced regulation systems enable automatic switching between heating and cooling modes, notably via a 6-way valve. Manual control remains possible depending on the specific requirements of the project.

63 kW power and energy control

With its 63 kW thermal power, this equipment guarantees rapid and homogeneous distribution of treated air, even in very open configurations. The integrated EC motor ensures excellent energy efficiency, allowing electricity savings of up to 50% compared to traditional AC motors. The proportional variation of the fan contributes to quieter operation and precise adjustment of the airflow.

Flexible installation and orientable air distribution

The design of the Prism PRI32 facilitates its integration into existing hydraulic networks. The unit can be oriented to position the connections on the left or right, thus simplifying on-site installation. The adjustable fins allow the airflow to be directed according to the geometry of the room. An optional air deflector also allows the air to be redirected sideways when the configuration requires it.

Mounting methods and electrical connection

The air heater is permanently fixed to the wall with horizontal air discharge or to the ceiling with vertical air discharge. In cooling mode, wall mounting is required. Accessories are assembled by screws or plugs before fixing to a suitable support. Mounting brackets must be ordered separately.

The fan motor connects to an independent terminal block (not supplied), to be installed in the immediate vicinity of the unit. When adding a filtration module, holes must be drilled in the casing for cable passage.

Water coil and hydraulic requirements

The water coil uses copper tubes designed to withstand severe conditions. The smooth connections allow connection by soldering or compression. A purge valve must be installed at the high point of the circuit to ensure stable operation in both heating and cooling modes. Purge and drainage devices are not included. Compliance with the direction of flow (inlet/outlet) is essential during connection.

Main characteristics:

Function: heating and cooling

Motorization: high-efficiency EC

Installation: wall or ceiling

Hydraulic connection: left / right orientation

Admissible water temperature: up to +150 °C

Maximum pressure: 10 bar

With its high heating and cooling capacity, the Prism PRI32 is a suitable solution for professional projects seeking a high-performance, flexible, and energy-efficient air heater for treating large volumes.

About the Frico brand

Frico asserts itself as a major player in the development of innovative and economical heating solutions. Specialized in the design of products aimed at reducing energy loss while optimizing comfort, Frico offers a varied range including economical Thermozone air curtains, radiant cassettes inspired by solar heat, as well as air heaters recognized for their efficiency and longevity. Destratifiers and control systems complete the offer to optimize the thermal ambiance while minimizing consumption. Frico convectors finally offer an effective solution against cold drafts, ensuring homogeneous heat distribution. Frico thus represents the ideal choice for those seeking optimal heating performance combined with an approach to energy economy and efficiency.

Technical specifications - Frico Prism PRI32

Thermal performance
Power: 28/63 kW
Cooling power: 10/19 kW
Sensible cooling power: 14 kW
Temperature delta: 37/26 °C

Ventilation
Air flow: 2,250/7,150 m³/h

Sound level
Acoustic power: 84 dB(A)
Sound pressure: 42/68 dB(A)

Electrical characteristics
Current: 0.3/3.3 A

Physical characteristics
Water volume: 3.8 l
Weight: 51 kg

Product identification
Brand: Frico
Model: Prism
Supplier reference: PRI32
Classification: EQUIPMENT