UNI 1000L Double Wall Diesel Storage Station - HDPE - CEMO

UNI Double Wall Platinum Station 1000 litres - HDPE Inner Tank - Diesel - CEMO

UNI Platinum Station 1000 litres

For daily use under shelter:

UNI storage tank equipped with a vent

230 V self-priming vane electric pump mounted on a plate

Automatic nozzle with swivel fitting

Nozzle holder supplied

Locking padlock for the nozzle on its holder (supplied with 2 keys)

3-digit mechanical meter with reset wheel

4 metres of DN 19 distribution hose with swivel fitting at meter outlet

Tanks must be manufactured in accordance with French, European standards or any other standard of an EU Member State recognised as equivalent.

Above-ground outdoor storage (non-buried):

Tanks must have a watertight double skin allowing any leak to be detected. Single-wall tanks are permitted if placed in a watertight retention sump with a capacity corresponding to at least the greater of these two values:
- 100% of the capacity of the largest tank
- 50% of the total capacity of the tanks

Tanks must be sufficiently opaque to preserve diesel quality

Tanks must be firmly fixed to the ground on a masonry base

When storage exceeds 15,000 litres:

Distance between 2 tanks: 0.2 D (D = width of the largest tank) with a minimum of 1.5 metres

Tanks must be surrounded by a fence at least 1.75 metres high

Indoor storage (non-buried):

Containers or tanks must be equipped with a watertight secondary envelope, fire-resistant and allowing any loss of tightness of the inner envelope to be detected

Single-wall tanks are permitted if placed in a watertight and non-combustible retention tank with a capacity at least equal to that of the tank

Tanks of the same type, same capacity and same height can be grouped together to form a storage facility with a total maximum capacity of 10,000 litres. Their interconnection must be made at the top and they must be installed at the same level

For tanks over 2,500 litres stored in a building, a dedicated closed, ventilated room with fire-resistant characteristics is mandatory

About the CEMO brand

CEMO is a recognised manufacturer for its innovative and reliable solutions in the field of secure storage and transport of hazardous materials. Specialising in the production of fire safety cabinets, fuel tanks and lithium battery storage systems, CEMO combines technical expertise and compliance with the strictest safety standards. For several decades, the company has distinguished itself by the quality of its products designed to meet the requirements of construction and industry professionals.

UNI 1000 L CEMO Fuel Distribution Station – Ref. 9597A

This fuel distribution station offers a complete and secure solution for diesel storage and transfer. Designed for professional use, it combines mechanical robustness and pumping performance in a compact and reliable unit.

Construction & Tank
The galvanized steel outer casing (thickness 8/10 to 10/10) provides optimal protection against corrosion, while the inner HDPE tank ensures chemical compatibility with stored fluids. This double wall allows safe storage of diesel, hydraulic oils and coolant, for a maximum allowable density of 1.2 kg/dm³.

Pumping Performance
The 230 V electric motor pump unit delivers a power of 370 W with an intensity of 3.9 A. It provides a flow rate of 56 l/min at a maximum pressure of 2 bar, with a suction height up to 4 meters. The rotation speed reaches 2800 rpm for operating cycles of maximum 30 minutes. The noise level remains below 75 dB(A), and the IP 55 protection index ensures resistance to water spray and dust.

Distribution Equipment
The station includes a 3-digit mechanical meter equipped with a reset wheel and a totalizer for precise tracking of distributed volumes. The rubber delivery hose DN 19 extends over 4 meters, completed by an automatic gun with 1" female swivel connection. On the suction side, a DN 25 dip tube with filter strainer and a 1.2 meter DN 25 connection allow efficient withdrawal. An integrated check valve prevents fluid backflow.

Technical Specifications

Dimensions (L x W x H)	166 x 77 x 149 cm
Weight	109 kg
Temperature Range	-20°C to +30°C (tank) / -20°C to +60°C (pump)
Connection	Inlet/Outlet F 1" – 2 m cable with wall plug
Pump Materials	Cast iron, sintered steel, acetal resin
Shut-off Valve	No
Handleable when loaded	No
Stackable	No
Transportable	No
Recommended Storage	Indoors or under shelter
EAN Code	3700862904290

Conditions of Use
Fixed station requiring indoor or sheltered installation. Not designed for transport, stacking or handling when loaded. Strict respect of temperature ranges is imperative to preserve material integrity and motor pump performance.